top of page

Sage Fixed Assets vs NetSuite FAM: MACRS, Section 179 and pricing model

6 minutes ago
9 min read
Cover image with the title Sage Fixed Assets vs NetSuite FAM: MACRS, Section 179 and pricing model over a night city skyline. Data Studios original cover

Sage Fixed Assets is a dedicated US depreciation product with MACRS methods, Section 179 and bonus depreciation handling and built-in IRS Form 4562 and Form 4797 output, while NetSuite Fixed Assets Management (FAM) is an ERP SuiteApp whose documented strength is the asset subledger: acquisition, book depreciation, journal postings per accounting book, revaluation and disposal. Neither vendor publishes a list price for these products. Sage sells through demos and "request information" contacts with several editions, and Oracle NetSuite directs buyers to a sales representative.


The difference shows up at year end. In the NetSuite help documentation reviewed on November 20, 2026, the predefined FAM depreciation methods include 150DB, 200DB, Straight Line and Sum of Years Digits, but MACRS, Section 179 and bonus depreciation are not named, and no IRS form output is described. Sage documents MACRS 150% and 200% methods with tables and formulas, the 2026 Section 179 limit of $2,560,000 and support for 100% bonus depreciation in its January 2026 release.


For a US controller the practical decision is therefore about where the tax depreciation book lives. A company already running NetSuite can keep GAAP depreciation in FAM and either configure alternate tax methods there, maintain a separate tax fixed asset system, or let its tax provider compute MACRS outside the ERP. A company on Sage Intacct or another general ledger can run Sage Fixed Assets as the system of record for both book and tax and post summarized entries to the ledger.


··········


SAGE FIXED ASSETS DEPRECIATION: BOOKS, METHODS AND TAX FORMS.


Sage presents Sage Fixed Assets as four modules: Depreciation, Planning, Tracking and Reporting. The features page states that the Depreciation module offers "over 50 depreciation formulas" and lets users bulk edit depreciation methods and lives "in up to 20 depreciation books." The older US user guide, last updated in January 2020, describes seven books for a US company: Tax, Internal, State, AMT, ACE and two custom books. Buyers comparing editions should confirm the current book count for the edition they are quoted, because the two official documents give different figures.


The depreciation datasheet lists MACRS 150 percent and 200 percent methods "formulas and tables", ACRS, straight-line, declining balance, sum-of-the-years-digits and user-defined methods. It also describes ADS straight-line methods added for Code Section 163(j) and a Section 199A report added after the 2017 tax law. The user guide covers the switch between half-year and mid-quarter conventions and a Mid-quarter Applicability report, which a tax team uses to see whether the mid-quarter convention is triggered for the year.


Tax output is the clearest difference from an ERP asset module. The features page lists built-in forms and worksheets for Forms 3468, 4255, 4562 and 4797, and the datasheet adds Form 4626. The Sage Fixed Assets 2026.1 release notes, dated January 2026, update the Section 179 figures for tax years beginning in 2026: a maximum deduction of $2,560,000, a phase-out threshold of $4,090,000 and an SUV limit of $32,000. The same release adds support for 100% bonus depreciation and increased Section 179 expensing under the One Big Beautiful Bill Act, a "Section 168 Extra" option for applying a chosen bonus percentage to assets placed in service after 2022, and Form 4562 support for the 2024 and 2025 tax years.


On integration, the datasheet describes built-in links for Sage general ledgers and a Universal Link for other ledgers. The 2026.1 release adds an option to change asset templates when assets are created from Sage Intacct accounts payable and purchase order data. The editions named in the release notes are Depreciation Premier, Cloud, Network and Standard, plus Lite and Sage 50 variants and matching Tracking editions; the Excel export of the Depreciation Expense report is marked as a subscription license feature.


··········


NETSUITE FIXED ASSETS MANAGEMENT: WHAT THE SUITEAPP DOCUMENTS.


Oracle describes FAM as a SuiteApp that "provides automated management of fixed assets acquisition, depreciation, revaluation, and retirement, as well as maintenance schedules and insurance." It can create assets from vendor bills, expense reports and inventory transfers, import mid-life assets with their depreciation history, and track non-depreciating items. Installation requires enabling Custom Records, Custom Transactions, Client and Server SuiteScript and Online Forms, and the SuiteApp updates automatically when Oracle releases changes to the bundle.


The predefined depreciation methods listed in the help center are 150DB, 200DB, 250DB, 25% Reducing Balance, 4-4-5 Calendar Depreciation, Asset Usage, Capital Allowance Year 1 and Year N, Fixed Declining, Straight Line, Straight Line Remaining, Sum of Years/Straight Line, Sum of Years Digits and Zero Depreciation. Users can define their own methods and link two methods so that one applies for part of an asset's life and another for the remainder. The help pages carry release metadata older than the current version, so the list should be checked in the account under Fixed Assets > Setup > Depreciation Methods.


For tax, FAM uses alternate methods. The documentation states that the SuiteApp "lets you set up multiple alternate methods of asset depreciation for tax reporting" and that "alternate methods aren't linked to NetSuite journal postings." Alternate methods support Half Year and Mid-Quarter conventions for annual depreciation and Mid-Month for monthly depreciation, an override flag at asset level, group tax methods for pooled assets and a Depreciation Schedule Report by asset type. Section 179, bonus depreciation, the mid-quarter test and Form 4562 are not mentioned in the pages reviewed.


The Multi-Book Accounting add-on for FAM assigns assets to several accounting books, each with its own depreciation methods and, with parallel currencies, its own base currency. Depreciation and journal entry creation run separately for each book through book-specific journal entries, which suits a group that reports under US GAAP and a local GAAP. The existing comparison of NetSuite vs Sage Intacct for multi-entity consolidation covers the wider ERP licensing question.


··········


SAGE FIXED ASSETS VS NETSUITE FAM: FEATURE AND PRICING COMPARISON.


The table summarizes what each vendor's official pages state, as verified on November 20, 2026. "Not documented" means the feature did not appear in the pages reviewed; it may exist through configuration, partners or later releases, and should be confirmed in a demo.


........


Item

Sage Fixed Assets

NetSuite FAM

Product type

Dedicated fixed asset software

SuiteApp inside NetSuite ERP

MACRS methods

Yes, 150% and 200%, tables and formulas

Not documented; 150DB and 200DB available

Conventions

Half-year, mid-quarter, mid-month

Half Year, Mid-Quarter, Mid-Month on alternate methods

Section 179

Yes, 2026 limit $2,560,000

Not documented

Bonus depreciation

Yes, 100% under OBBBA

Not documented

IRS forms

3468, 4255, 4562, 4626, 4797

Not documented

Depreciation books

Up to 20 (features page)

Unlimited methods per asset with Multi-Book add-on

GL posting

Links to Sage ledgers, Universal Link

Native journal entries per accounting book

Published price

None; demo or request information

None; NetSuite sales representative


........


Pricing has to be built from quotes. Sage's features page offers "Book a demo" and "Request information" and refers to "the right plan for you", and the release notes distinguish subscription licenses from other license types and list Standard, Network, Premier and Cloud editions. NetSuite's FAM documentation does not state a price; the installation page suggests NetSuite professional services for implementation and refers buyers to their sales representative. A fair cost comparison therefore adds the FAM SuiteApp and any Multi-Book add-on to the NetSuite subscription, and compares that with the Sage edition plus the cost of the ledger link and any CCH or other tax-software link the tax team needs.


··········


WORKED EXAMPLE: MACRS 5-YEAR PROPERTY VS GAAP STRAIGHT-LINE.


The illustrative asset is a $120,000 machine that qualifies as 5-year MACRS property and is placed in service in 2026. For GAAP the company uses straight-line depreciation over five years with a half-year convention. For tax, the first scenario assumes the company elects out of bonus depreciation and takes no Section 179 deduction, so MACRS 200% declining balance with the half-year convention applies. The deferred tax line uses the 21% federal corporate rate and ignores state taxes. All amounts were computed in Python, and the MACRS percentages reproduce the standard 5-year half-year table: 20.00%, 32.00%, 19.20%, 11.52%, 11.52% and 5.76%.


........


Year

GAAP depreciation

MACRS depreciation

Cumulative difference

Deferred tax liability

2026

$12,000

$24,000

$12,000

$2,520

2027

$24,000

$38,400

$26,400

$5,544

2028

$24,000

$23,040

$25,440

$5,342.40

2029

$24,000

$13,824

$15,264

$3,205.44

2030

$24,000

$13,824

$5,088

$1,068.48

2031

$12,000

$6,912

$0

$0


........


The second scenario applies 100% bonus depreciation, which Sage documents as supported in its 2026.1 release. The full $120,000 is deducted for tax in 2026, so the cumulative difference at the end of 2026 is $108,000 and the deferred tax liability is $22,680. The liability then falls by $5,040 a year as GAAP depreciation of $24,000 continues: $17,640 at the end of 2027, $12,600 in 2028, $7,560 in 2029, $2,520 in 2030 and zero in 2031. The rules on combining Section 179 with bonus depreciation are covered in Section 179 vs bonus depreciation for 2026.


In Sage Fixed Assets this asset would carry an Internal book with straight-line and a Tax book with a MACRS method, and the book-to-tax difference comes from comparing the two books. In NetSuite FAM, the GAAP book posts journal entries, and the tax schedule needs an alternate method built from the 200DB method with the Half Year convention. Before relying on it, the tax team should confirm that the configured method switches to straight-line in the year that gives the larger deduction and fully recovers the basis in the sixth year, matching the 2029 to 2031 figures above. The bonus and Section 179 amounts would need to be handled outside the documented FAM features.


··········


CHECKING VENDOR DEPRECIATION SCHEDULES IN EXCEL WITH CLAUDE.


A depreciation report exported from either system can be tested in Excel against an independent calculation. Anthropic documents Claude for Excel as an Office add-in available on Pro, Max, Team and Enterprise plans, for Excel on the web, Excel on Windows with Microsoft 365 from build 16.0.13127.20296 and Excel on Mac from version 16.46. The add-in returns cell-level citations and can explain formulas and trace errors. The documentation lists audit-critical calculations without verification and highly sensitive or regulated data without proper controls among the uses it does not recommend, so the add-in is a reviewer's aid, and the tax book of record stays in the fixed asset system. A step-by-step approach to building the schedule itself is in capex and depreciation schedule in Excel with Copilot, Claude or ChatGPT.


A prompt for the export used in the example might read as follows.


Sheet "FA_Export" has one row per asset: Asset ID, Cost, Placed in service date,
MACRS class, Bonus %, Sec 179 amount, Tax depreciation 2026, GAAP depreciation 2026.
1. Add a column with the expected 2026 MACRS deduction using the 200% declining
   balance half-year rates for 3-, 5- and 7-year property, applied to cost after
   Section 179 and bonus.
2. Flag every row where the exported tax depreciation differs from the expected
   amount by more than $1.
3. Add the 2026 book-tax difference and the deferred tax at 21%.
Cite the cells used for each flagged row and do not change the original columns.

For the $120,000 machine without bonus, the correct 2026 results are a MACRS deduction of $24,000, a GAAP charge of $12,000, a difference of $12,000 and deferred tax of $2,520. With 100% bonus, the expected tax deduction is $120,000 and the deferred tax is $22,680. Anthropic's documentation states that workbook content Claude reads is sent to Anthropic, that inputs and outputs are deleted on the back end within 30 days subject to listed exceptions, and that the add-in does not inherit custom organization retention settings, a point for the controller to weigh before loading asset registers that contain sensitive cost data.


The common errors in this check are applying the half-year rate when more than 40% of the year's depreciable basis is placed in service in the last quarter and the mid-quarter convention applies, applying MACRS rates to the full cost before deducting Section 179 and bonus, and booking a full year of straight-line GAAP depreciation in the year of acquisition when the policy uses a half-year convention. Each flagged row should be traced back to the asset record in the fixed asset system before any correction is posted.


··········


CHOOSING BETWEEN SAGE FIXED ASSETS AND NETSUITE FAM FOR US TAX DEPRECIATION.


On the documented features, Sage Fixed Assets covers the US tax book end to end: MACRS tables, mid-quarter testing, Section 179 limits updated for 2026, 100% bonus depreciation and Form 4562 output. NetSuite FAM covers the GAAP subledger inside the ERP, posts depreciation to each accounting book and supports alternate tax methods with US conventions, but its help pages do not document MACRS tables, Section 179, bonus depreciation or IRS forms.


A company already on NetSuite with a small asset base and an outside tax preparer can keep FAM for book depreciation and let the preparer compute tax depreciation, accepting a reconciliation step at year end. A company with many assets, state conformity differences or in-house tax compliance is better served by a dedicated tax book such as Sage Fixed Assets, linked to whichever ledger it runs. The deferred tax figures in the worked example, $2,520 without bonus and $22,680 with full bonus at the end of 2026, show how far the two books can diverge on a single asset. The tax position also feeds the deferred tax balance, which links to the judgement on valuation allowances under ASC 740 and IAS 12.


Price remains the open variable. Neither vendor publishes list prices, the Sage book count differs between its features page and its user guide, and NetSuite's alternate-method documentation should be confirmed against the installed SuiteApp version. A demo script built on the example above, with one asset, both scenarios and the expected figures, gives both vendors the same test.


··········


FOLLOW US FOR MORE.


·····


DATA STUDIOS


·····


datastudios.org


bottom of page