Retail inventory method under ASC 330 and IAS 2: cost-to-retail ratio

The retail inventory method estimates the cost of ending inventory by converting the retail value of goods on hand into cost with a cost-to-retail ratio. Both US GAAP and IFRS accept it. Under ASC 330 it keeps a special status: since ASU 2015-11, inventory measured with LIFO or the retail inventory method is still carried at the lower of cost or market, while every other cost method moved to the lower of cost and net realizable value. Under IAS 2 Inventories the retail method is a measurement convenience that is acceptable only when the result approximates cost, and the usual lower of cost and net realizable value test applies afterwards.
The practical difference sits in one number: how markdowns enter the cost-to-retail ratio. When net markdowns are left out of the denominator, the ratio falls and the method produces a lower inventory figure that approximates the lower of cost or market. When markdowns are included, the ratio produces an average cost figure. For a retailer with thousands of SKUs, that choice can move year-end inventory and gross margin by several percentage points of the inventory balance, and in the worked example below the gap is USD 3,410 on a USD 135,000 retail count.
The question arises for department stores, grocery chains, apparel and specialty retailers, and any business that tracks stock at selling price rather than at item cost. It also comes up in audits of interim balances, when a retailer estimates inventory between physical counts, and in book-tax reconciliations, because the IRS has its own rules for markdowns under the tax retail method.
··········
HOW THE RETAIL INVENTORY METHOD WORKS.
The method follows the same sequence under both frameworks. The retailer accumulates goods available for sale at both cost and retail, computes a cost-to-retail ratio, deducts sales and other reductions at retail to reach ending inventory at retail, and multiplies that amount by the ratio to estimate ending inventory at cost.
Goods available at cost include beginning inventory, net purchases and freight-in. Goods available at retail include beginning inventory at retail, purchases at their original selling price, net of purchase returns at retail, plus net markups and minus net markdowns. Net markups are increases above the original selling price, net of markup cancellations. Net markdowns are reductions below the original selling price, net of markdown cancellations.
Deductions from goods available at retail are net sales, employee discounts and normal shrinkage, the expected loss from theft, damage and recording errors that the retailer builds into the estimate. Abnormal shrinkage found at a physical count is recorded separately, as a loss in the period it is discovered.
The ratio can be computed in several ways. The two variants that matter for financial reporting are the conventional retail method, which includes net markups in the denominator and excludes net markdowns, and the average cost retail method, which includes both. A third variant, the LIFO retail method, adds layers of retail value by year and is available only under US GAAP, because IAS 2 does not permit LIFO.
··········
RETAIL INVENTORY METHOD UNDER ASC 330.
US GAAP measures inventory at cost and then applies a lower-of test. ASU 2015-11, Simplifying the Measurement of Inventory, changed that test for most entities. Its summary states that the new requirements do not apply to inventory that is measured using LIFO or the retail inventory method, and that subsequent measurement is unchanged for those inventories. The amendments took effect for public business entities for fiscal years beginning after December 15, 2016, including interim periods within those years.
The codified text reflects the split. ASC 330-10-35-1B requires inventory measured using any method other than LIFO or the retail inventory method to be measured at the lower of cost and net realizable value. ASC 330-10-35-1C keeps the older approach for LIFO and retail method inventory, stating such goods at a lower level commonly designated as market.
Market in that older test means current replacement cost, limited by a ceiling of net realizable value and a floor of net realizable value less a normal profit margin. The conventional retail method was designed to approximate this result. Leaving net markdowns out of the denominator raises retail value in the ratio, lowers the ratio, and applies a lower cost percentage to the goods still on hand. The markdowns already taken are treated as a decline in utility of the inventory that should reduce its carrying amount.
A US retailer using the retail method should therefore document which variant it applies, show that the conventional calculation approximates lower of cost or market, and apply the method consistently by department or by group of goods with similar margins. If the retailer instead uses the average cost retail method, the result approximates average cost, and the entity still needs a separate lower-of test on top of it. For context on how write-downs then flow through margins and ratios, see the related analysis on how inventory write-downs affect profitability and financial ratios.
··········
RETAIL INVENTORY METHOD UNDER IAS 2.
IAS 2 Inventories requires inventories to be measured at the lower of cost and net realizable value. It allows techniques for measuring cost, including the standard cost method and the retail method, to be used for convenience when the results approximate cost. The standard describes the retail method as often used in the retail industry for measuring inventories of large numbers of rapidly changing items with similar margins, for which other costing methods are impracticable.
Under IAS 2, cost is determined by reducing the sales value of the inventory by the appropriate percentage gross margin. The standard states that the percentage used takes into consideration inventory that has been marked down below its original selling price, and that an average percentage for each retail department is often used.
Two consequences follow. First, the objective under IFRS is an approximation of cost, so the markdown adjustment aims to reflect the actual margin on the goods still in stock, department by department. Second, because the lower-of test under IAS 2 is net realizable value, a retailer must still compare the estimated cost with the estimated selling price less costs to complete and sell, and write down items or groups whose net realizable value is lower. A blanket conventional ratio that pushes inventory below cost without reference to net realizable value is a different measurement from the one IAS 2 asks for.
LIFO retail layers are not available under IFRS. A US group with a LIFO retail subsidiary that reports under IFRS at group level needs a separate FIFO or weighted average calculation for consolidation.
··········
RETAIL INVENTORY METHOD: ASC 330 VS IAS 2.
........
Point | US GAAP (ASC 330) | IFRS (IAS 2) |
Status of the method | Accepted cost method | Accepted if result approximates cost |
Lower-of test | Lower of cost or market | Lower of cost and NRV |
Typical ratio variant | Conventional, markdowns excluded | Average margin reflecting markdowns |
LIFO retail | Permitted | Not permitted |
Grouping | By department or similar margins | Average percentage per department |
Reversal of write-downs | Not permitted | Required when NRV recovers |
........
The last row affects retailers with seasonal goods most. Under US GAAP, a reduction to market creates a new cost basis that is not reversed. Under IAS 2, a write-down to net realizable value is reversed, up to the original write-down, when the circumstances that caused it no longer exist.
··········
WORKED EXAMPLE: COST-TO-RETAIL RATIO AND YEAR-END ENTRIES.
An illustrative apparel retailer with a December 31, 2026 year-end and a periodic inventory system gathers the following amounts for one department. All figures are in USD and are illustrative.
........
Item | Cost | Retail |
Beginning inventory | 120,000 | 200,000 |
Purchases | 540,000 | 860,000 |
Freight-in | 12,000 | |
Purchase returns | (8,000) | (13,000) |
Net markups | 25,000 | |
Goods available before markdowns | 664,000 | 1,072,000 |
Net markdowns | (42,000) | |
Goods available at retail | 664,000 | 1,030,000 |
Net sales | (880,000) | |
Employee discounts | (6,000) | |
Normal shrinkage estimate | (9,000) | |
Ending inventory at retail | 135,000 |
........
The conventional ratio divides cost available by retail available before markdowns: 664,000 / 1,072,000 = 61.94%. The average cost ratio divides cost available by retail available after markdowns: 664,000 / 1,030,000 = 64.47%. Applying each ratio, unrounded, to ending inventory at retail of 135,000 gives the following results.
........
Variant | Ratio | Ending inventory at cost | Cost of goods sold |
Conventional (markdowns excluded) | 61.94% | 83,619 | 580,381 |
Average cost (markdowns included) | 64.47% | 87,029 | 576,971 |
Difference | 3,410 | (3,410) |
........
Under ASC 330, the retailer applying the conventional method carries the department at USD 83,619, which approximates lower of cost or market. Under IAS 2, the average cost figure of USD 87,029 is the closer approximation of cost, and the retailer then tests it against net realizable value. If the marked-down goods still in stock are expected to sell below their cost, a write-down is recorded on top.
The periodic closing entry under the conventional method transfers the cost of goods available to ending inventory and cost of goods sold.
........
Account | Debit | Credit |
Inventory (ending) | 83,619 | |
Purchase returns and allowances | 8,000 | |
Cost of goods sold | 580,381 | |
Inventory (beginning) | 120,000 | |
Purchases | 540,000 | |
Freight-in | 12,000 | |
Total | 672,000 | 672,000 |
........
At the year-end physical count, the store counts goods with a retail value of 133,000, which is 2,000 below the book figure of 135,000 that already includes the normal shrinkage estimate. The excess shrinkage is converted to cost with the same ratio: 2,000 × 61.94% = USD 1,239 under the conventional method (USD 1,289 under the average cost ratio).
........
Account | Debit | Credit |
Inventory shrinkage loss | 1,239 | |
Inventory | 1,239 |
........
After this entry, the department's inventory under the conventional method is USD 82,380. The count procedures and cut-off checks behind that physical figure are covered in detail in the analysis of physical inventory counts, shrinkage and cut-off entries under ASC 330.
··········
PRESENTATION, DISCLOSURE AND TAX INTERACTION.
Both frameworks require disclosure of the accounting policies for measuring inventories, including the cost formula used. A retailer using the retail method should state that fact, the variant applied and the level of grouping. Under IAS 2, the carrying amount of inventories by classification, the amount of write-downs recognized as an expense and any reversals are also disclosed. Under US GAAP, a retailer using LIFO retail discloses the LIFO basis, and public companies commonly present the LIFO reserve.
The tax retail method follows its own rules. IRS Publication 538 describes the retail method as reducing the retail selling price to approximate cost by an average markup expressed as a percentage of total retail selling price. It recognizes markdowns only if the goods were offered to the public at the reduced price, and disallows markdowns not based on an actual reduction of the retail sales price. For a retailer not using LIFO, the publication describes the practice of adjusting retail selling prices for markups but not markdowns, while a retailer using the retail method with LIFO must adjust for markdowns as well as markups. Differences between the book and tax ratios create temporary differences in the inventory balance that flow into deferred taxes.
··········
COMMON ERRORS AND JUDGMENT AREAS.
Mixing departments with different margins is the most frequent error. A single store-wide ratio applied to a mix of high-margin accessories and low-margin electronics misstates cost whenever the sales mix of the remaining stock differs from the mix of goods purchased. Both frameworks point to department-level percentages for this reason.
Freight-in, purchase discounts and vendor allowances belong in the cost numerator and are often recorded in the wrong account or period. Vendor markdown support received from suppliers reduces the cost of the related inventory and should not be booked straight to revenue or selling expenses.
Markdown classification is a judgment area. Temporary promotional prices that end before the reporting date are usually not markdowns of the inventory still on hand, while permanent price reductions on aged or seasonal goods are. Employee discounts reduce retail value without being markdowns, and they should be deducted after the ratio is computed.
Normal shrinkage must be estimated from history and adjusted when counts show a trend change. A shrinkage rate that is too low inflates ending inventory between counts, a point that also affects interim cut-off, as discussed in the review of year-end close under US GAAP: cut-off, accruals and adjusting entries.
Manufacturing retailers that also apply standard costs to private-label goods need to keep the two methods separate. The treatment of standard cost variances between inventory and cost of sales is covered in the related analysis of standard cost variances under ASC 330 and IAS 2.
··········
RETAIL METHOD YEAR-END CHECKLIST.
Confirm the ratio variant used for each reporting framework and document why it approximates lower of cost or market under ASC 330 or cost under IAS 2.
Compute ratios by department or by group of goods with similar margins, and reconcile the retail ledger to point-of-sale data before applying them.
Separate net markups, net markdowns, employee discounts and normal shrinkage in the retail ledger, and check that markdown cancellations are netted correctly.
Reconcile the book retail figure to the physical count, record excess shrinkage at the department ratio, and investigate departments with unusual variances.
Under IAS 2, test the estimated cost against net realizable value and record or reverse write-downs. Under US GAAP, confirm that no reversal of a previous reduction to market has been recorded.
Track the book-tax differences created by the tax retail method rules on markdowns and LIFO, and record the related deferred tax.
··········
COST-TO-RETAIL RATIO UNDER ASC 330 AND IAS 2: CONCLUSIONS FOR RETAILERS.
The retail inventory method is accepted under both ASC 330 and IAS 2, and the arithmetic is the same: goods available at cost and retail, a cost-to-retail ratio, and ending retail inventory converted to cost. The frameworks diverge on the objective. ASC 330 keeps retail method inventory under the lower of cost or market test, and the conventional ratio that excludes markdowns is the standard way to approximate it. IAS 2 accepts the method only as an approximation of cost, with markdowns reflected in the margin percentage and a separate net realizable value test.
The open judgment areas are the grouping of departments, the classification of markdowns, the normal shrinkage rate and, for groups reporting under both frameworks, the reconciliation between a US conventional or LIFO retail figure and an IFRS average cost figure. In the example, the choice of ratio alone moved year-end inventory by USD 3,410, about 4% of the department's carrying amount.
··········
FOLLOW US FOR MORE.
·····
DATA STUDIOS
·····
datastudios.org




